Larger Cracks in the Drywall in Long Beach Are Inspected for Mold and Water Damage

by | Nov 6, 2014 | Carpet Cleaning

Latest Articles

Categories

Tags

Archives

Minor cracks in the drywall are hardly noticeable. It is easy for anyone to procrastinate and put the problem aside because it really does not seem like a large problem at all. But as the crack expands, and it often does, it may be time to bring out some bigger guns and some more motivation.

Now below are some quick tips to repair the Drywall in Long Beach when the cracks become more than marginally noticeable. But these should be taken on by a professional, or at the very least someone that is aware of what is going on. For example, cracks in the drywall could be an indication of something unruly underneath the house, such as wood splintering or a mud hole forming. The best path to take is to get an official review by a property appraisal. With that said, some quick cosmetic tips follow.

Time for the Handsaw

Some small cracks can be resolved with a small putty knife, but larger cracks need a handsaw. Perhaps this is why many people hold off on the issue. The handsaw is fun to use, of course! A hole is cut into the space where the crack exists. Now always inspect the back of the actual cut out drywall. Any indication of mold could be a sign that water is penetrating the space and causing the cracks. If there is no sign of drywall mold, this could actually be a sign of a larger problem. For example, the foundation could be crumbling and causing the wall to procure cracks, especially if the cracks are focused on rising up the wall.

Backer Board Installation

At this point, professional assistance may be required. A professional with Drywall in Long Beach may install a backer board to help hold the replacement drywall space. Click here to learn more about how this process works in greater detail and to talk to a professional. Make sure to be careful with the pressure applied.

Do not use excessively long nails that will actually place too much strength on the replaced drywall area and cause it to collapse. Sandpaper is finally used to smooth out the surface. Some professionals may use drywall clips to bridge the back part to the new drywall, but this is also a delicate process.

Similar Posts