Heat pumps operate differently than the typical air-cooled air conditioner. When working with a heat pump that provides heating and cooling, you have multiple issues that could affect either part of the pump. When you notice an issue, you may have to look at different parts of the pump before reaching out to a heating company Chicago service to get an estimate.
Here are a few issues to troubleshoot before you start taking apart the pump on your own.
Winter Icing
During extreme cold, your heat pump can suffer damage from being outside. It could be covered with frost on both sides. Even light ice may cause issues. Most heat pumps have a defrost mode that will remove the frost.
In this case, your unit may not defrost correctly, or your outdoor fan could be stuck. Your unit may also be running low on refrigerant. You should remove any debris or snow that is blocking the unit. If you want to chip away at the ice, then you should use water from a hose instead. Using a pick or pointy object can damage your coils.
Summer Icing
If your heat pump ices up in the summer, then there is likely some other issue, such as a refrigerant leak, dirty filter, or dirty coils that are not transferring heat correctly.
You should turn the system off to prevent any more damage when it freezes over.
Heat Pump Runs Constantly
This is another common problem in the summer that can happen when your unit can’t reach a low set temp, which means that it continues to run. You may want to check the thermostat to make sure that it’s set correctly.
If you need heating company Chicago services, then why not work with the professionals at Heatmasters Heating and Cooling? You can find all of their services online: https://www.heatmasters.com/
