Benefits of Keeping an HVAC in Glenview, Clean and Well Maintained

by | Nov 8, 2021 | Air Conditioning

Latest Articles

Categories

Tags

Archives

Keeping an HVAC Glenview, clean and in good working order is important to make sure the unit lasts as long as possible. While most units are designed to last over 20 years, they must be regularly maintained to do so. One of the most important ways this can be done is by making sure the unit is cleaned on a regular basis and inspected to ensure no parts are damaged or faulty.

Most HVAC systems should be cleaned and inspected prior to the start of periods when the unit will be in daily use. Since this generally occurs in summer and winter, a homeowner will want to think about cleaning the unit or hiring a technician to do the work for them before these seasons start.

When a technician comes to clean a home’s HVAC in Glenview, one of the first areas they will want to clean is the blower unit on the system. The blower is used by both the heating and cooling system to move the air into the ventilation system. Since the unit is used so often, it can become extremely dirty and will need to be vacuumed inside and out. In addition, the air filter on this unit should also be inspected and replaced if it is dirty.

The air conditioning system also has a compressor and condenser, which is generally located outside of the home. This unit can also become quite dirty because of its location. The technician will need to remove all types of debris in the unit such as leaves, grass and trash. Once this is done, the coils on the system should be cleaned using water and coil cleaner. The fins on the system will also need to be cleaned using a soft brush.

Gas heating systems have a burner, which provides the heat to the air. This unit should also be checked to make sure it is not dirty. This can be done by checking the condition of the flames when the heat is turned on. If the flames are blue and steady, the unit is working properly. Orange or yellow flames indicate the burner may be dirty. The technician will need to disassemble the burner and clean the various parts in the unit to correct the problem. For more information on HVAC visit Heatmasters Heating & Cooling.

Similar Posts