A sewage problem in your home or yard can leave you with a smelly mess, but the hardest part for any homeowner to deal with is Sewage Restoration in Apopka FL. That is, the removal and repair of any damaged sewer pipes. Part of the problem with sewer backups is determining the cause. In many cases, the problem is a simple clog, but sewage failure can also be caused by breaks in the pipes. When the breaks are large enough, the damage to your yard can be significant. Sewage restoration can help by removing the residual waste and tainted soil which makes accessing the failure much easier.
Not every home is located where they can connect to the local municipal sewage service. In these cases the home must use a septic system. This is a combination of a collection tank where the waste can break down and a series of field lines that are used to spread the effluent into the soil. This allows the waste water to be filtered back into the local water table without transporting biological waste in the process. Newer septic systems make use of chemical systems, aeration or diffusion for better waste processing, but the original design was the tank and leech lines.
Septic tanks can fail for several reasons. The most common is a full tank which causes the sewage to back up. You may also find this problem causes excess waste water around the tank itself. This happens when the water has nowhere to drain to. The cause of this particular failure is usually a clogged or damaged field line which is blocking the outflow of effluent. Alternately, the solid waste in the tank has blocked the leech lines and is forcing the water out the top of the tank. The resolution to this sort of dilemma is to have the tank pumped clean and the leech lines washed out. To ensure that the lines aren’t damaged you may want to have a plumber check them with a video snake. This should help them locate any blockage from damage or root problems. If you are in need of Sewage Restoration in Apopka FL or want to learn more about septic cleaning you can discover this info here.
